Technical Data For Cip (Clean-In-Place) Applications; Dimensions - Grundfos SMART Digital S DDE 6-10 Instrucciones De Instalación Y Funcionamiento

3.2 Technical data for CIP (Clean-In-Place) applications

Short-term temperature limits for max. 40 minutes at max. 2 bar operating pressure:
Max. liquid temperature for dosing head material PVDF
Max. liquid temperature for dosing head material stainless steel
The dosing head material Polyvinyl chloride (PVC) must not be used in CIP applications.

3.3 Dimensions

The indicated dimensions are the same for all control variants of the DDE range.
The following drawing shows the DDE-PR control variant.
17.5 110
105
120
Fig. 3 Dimensional sketch
Pump type
DDE 6-10
DDE 15-4
12
D
4 x Ø6
A1 [mm] B [mm]
251 196
251 200.5
A1
G 5/8
161
C [mm]
46.5
39.5
[°C] 85
[°C] 120
17
D [mm]
24
24