Type Key - Grundfos SMART Digital S DDE 6-10 Instrucciones De Instalación Y Funcionamiento

2.5 Type key

The type key is used to identify the precise pump and is not used for configuration purposes.
Code Example
Pump type
Max. flow [l/h]
Max. pressure [bar]
Control variant
B Basic
P B with pulse mode
PR P with relay output
Dosing head material
PP Polypropylene
PVC PVC (polyvinyl chloride, only up to 10 bar)
PV PVDF (polyvinylidene fluoride)
SS Stainless steel DIN 1.4401
Gasket material
E EPDM
V FKM
T PTFE
Valve ball material
C Ceramic
SS Stainless steel DIN 1.4401
Control cube position
X No control cube
Voltage
3 1 x 100-240 V, 50/60 Hz
Valve type
1 Standard
2 Spring-loaded (HV version)
Suction/discharge side connection
U2U2 Hose, 4/6 mm, 6/9 mm, 6/12 mm, 9/12 mm
U7U7 Hose 0.17" x 1/4"; 1/4" x 3/8"; 3/8" x 1/2"
AA Threaded Rp 1/4, female (stainless steel)
VV Threaded 1/4 NPT, female (stainless steel)
XX No connection
Installation set*
I001 Hose, 4/6 mm (up to 7.5 l/h, 13 bar)
I002 Hose, 9/12 mm (up to 60 l/h, 9 bar)
I003 Hose, 0.17" x 1/4" (up to 7.5 l/h, 13 bar)
I004 Hose, 3/8" x 1/2" (up to 60 l/h, 10 bar)
Mains plug
F EU
B USA, Canada
G UK
I Australia, New Zealand, Taiwan
E Switzerland
J Japan
L Argentina
Design
G Grundfos
* Including: 2 pump connections, foot valve, injection unit, 6 m PE discharge hose, 2 m PVC suction hose,
2 m PVC deaeration hose (4/6 mm).
DDE 6- 10 P- PP/ V/ C- X- 3 1 U2U2 F G
9