Support Surface Cleaning - Stryker Pioneer 0850 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 99
English

SUPPORT SURFACE CLEANING

___________________________________________________________________________________________________
WARNING
To avoid the risk of equipment damage, do not immerse support surface in cleaning or disinfectant solutions. Do not
allow liquid to pool on the support surface.
Inspect Pioneer support surface covers (top and bottom) for tears, punctures, excessive wear, and misaligned zippers
each time the covers are cleaned. If a mattress cover becomes compromised, remove the support surface from
service immediately and replace the cover to prevent cross-contamination.
Internal components of this support surface are not washable. If there is contamination inside the support surface,
discard the support surface.
_________________________________________________________________________________________________
Stryker support surfaces are designed for long-lasting comfort and reliability. The life of the support surface can be
adversely affected by an increase in frequency of usage which might include more frequent cleaning and disinfection.
1.
Using a clean, soft, damp cloth, wipe down the entire support surface with a mild soap and water solution to remove
foreign material.
2.
Wipe down the support surface with a clean, dry cloth to remove any excess liquid or cleaning agent.
3.
Care must be taken to thoroughly rinse and dry covers following cleaning.
4.
Disinfect as necessary with a hospital grade disinfectant AFTER cleaning has been completed. Refer to following
"Support Surface Disinfection" section.
_________________________________________________________________________________________________
CAUTION
To avoid the risk of equipment damage, when cleaning the underside of the support surface, ensure that no liquid is allowed
to seep into the zipper area and watershed cover barrier; fluids allowed to come in contact with the zipper may leak into the
support surface
__________________________________________________________________________________________________
Cleaning
Page 13 of 332

Publicidad

Tabla de contenido
loading

Tabla de contenido