Displays In Operating Mode - SICK IN3000 Direct Instrucciones De Operación

Chapter 3
Tab. 5:
LED displays in
operating mode
162
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice 8014173/XT35/2013-10-28
Product description
3.5

Displays in operating mode

The IN3000 Direct safety switch has two bi-color LEDs.
The LEDs illuminate green (Power LED) and/or yellow
(signal LED).
LED status Operational status
 Yellow (Signal) No supply voltage
 Green (Power)
 Yellow (Signal)
Undervoltage
Green (Power)
 Yellow (Signal)
Overvoltage
Green (Power)
Sensor error:
see chapter 9 "Error
rectification"
 Yellow (Signal) Supply voltage
 Green (Power)
present, actuating
element is in the
safe switch off
distance: s
Actuating element
 Yellow (Signal)
 Green (Power) inside the enable
zone
Actuating element
inside the near range
zone
Meaning of the symbols:
The LED is illuminated constantly.

The LED is flashing (1.65 Hz).
The LED flashes quickly (4.85 Hz).
The LED is off.

Signal LED: yellow
Power LED: green
Outputs
Both outputs
switched off
Both outputs
switched off
One output or
both outputs
switched off
Both outputs
switched off
ar
Both outputs
enabled
Output A2 is
switched off
Operating instructions
IN3000 Direct
OUT1 OUT2
0 0
1 0
0 0
0 0
0 1
1 0
0 0
0 0
1 1
1 0