Panel Assembly; Replacing The Sensor Pc Board - NAMCO PAC-MAN BALL Manual Del Usuario

7-4

Panel Assembly

7-4-1

Replacing the Sensor PC Board

•
Pc Boards can be easily damaged by static electricity. If a person charged
with static electricity handles a PCB, electronic components on the board
can be damaged.
Before handling a PCB, touch an earthed metal surface to release the
elctrostatic charge from the body.
1. Switch the power to the game OFF.
2. Remove the maintenance panel from the rear of the cabinet.
3. Disconnect 3off connectors, remove 2off pozi head screws (M3x6), and remove
the Sensor PC Board.
4. Re-assemble in reverse order.
Connector
Sensor PC board
Pozi head screws
Page 109
(M3 x 6)
Connector