NAMCO PAC-MAN BALL Manual Del Usuario página 129

6. Remove 2off pozi head screws (M4x20), and remove the Coin Hopper C.
Viewed with Cashbox Assy Removed
Coin hopper (C)
pozi head screws (M4 x 20)
7. Remove 2off pozi head screws (M4x6), remove the Disc Guard and replace
the Coin Hopper C.
Pozi head screws (M4 x 6)
8. Re-assemble in reverse order.
• When re-assembling, align the escalator mounting bosses with the
holes in the hopper, and secure the hopper with the wing bolts
(M4x12). If the bolts are loose, coins can jam.
•
If the fuse is blown, contact your distributor.
Hopper head A
Disc guard
Coin hopper (C)
Page 129