Replacing The Led Pc Board - NAMCO PAC-MAN BALL Manual Del Usuario

7-4-4

Replacing the LED PC Board

•
Pc Boards can be easily damaged by static electricity. If a person charged
with static electricity handles a PCB, electronic components on the board
can be damaged.
Before handling a PCB, touch an earthed metal surface to release the
elctrostatic charge from the body.
1. Remove the Checker Cover.
2. Disconnect the connector, remove 1off pozi head screw (M3x6), and remove the
LED PC Board.
3. Re-assemble in reverse order.
• When replacing the LED PC Board, keep the prism installed in each
checker sensor in a safe place to prevent it being lost, and be sure to re­
install it.
Orange
Connector
Black
Pozi head screw (M3 x 6)
(see 7-4-3 page 111)
LED PC board
Prism
Page 112
Connector