Resetting Errors - NAMCO PAC-MAN BALL Manual Del Usuario

6-3-4

Resetting Errors

When an Error message is displayed on the LCD screen, follow the resetting
procedure described below.
After an error has been reset, the game usually returns to the condition
immediately before the error occured.
• If a time-limited mini-game was being played at the time of error
generation, the mini-game restarts from the beginning (with full remaining
time) when the error is reset.
• When a BACKUP MEMORY (MEM (N)) or BACKUP MEMORY (MGEXIO)
error is reset, all data including the income date, security data, hardware
data, error history and settings are cleared, and the settings returned to
factory defaults.
1. Check the error indication to find out the cause of the problem.
2. Check and correct the cause of the error.
3. Unlock and open the Playfield Door.
4. Reset the error by turning the Test switch, located inside the Playfield Door,
to ON and then OFF.
5. Close and lock the Playfield Door.
Test switch
ON
Page 96