Collecting Coins From Hoppers And Escalators - NAMCO PAC-MAN BALL Manual Del Usuario

6-2-6

Collecting Coins from Hoppers and Escalators.

• If the coin hopper stops operating due to the entry of a foreign item,
correct the problem by following the procedures detailed in section 7-8
page 125. Do not attempt to operate the coin hopper in an abnormal
condition, as this may cause damage.
1. Set the Test switch ON.
2. Display the I/O TEST 2/5 screen, and set "MOTOR TEST / HOPPERS (L)
(R) (C)" to ON, then collect coins from the coin hoppers.
(see Motor Test - page 61)
Test switch
ON
Page 81