Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Move the edge slider fully to the right, (to remove any slack), and then
move it to the left to the required position to adjust the height of the front
edge.
The edge slider MUST first be moved fully to the right to ensure
accurate adjustment.
Moving the edge slider to the left by 1mm raises the front edge by 0.1mm
and moving the edge slider to the right 1mm lowers the front edge by
0.1mm.
6.
Retighten the 3off socket head screws (M4x14)
5-1-2
Measurement of the Field Payout Rate
•
An approximate Field Payout Rate can be made by using the "Field Payout
Rate measurement Mode" in the test mode.
•
It is recommended that the scale value, measured data, and date of
measurement are retained for future comparisons.
Note:
The edge slide scale value is only a guide. The actual field payout rate
should be calculated as above.
5-1-3
Basic Payout Rate
The Payout Rate is the ratio of the 'number of coins paid out' to the 'total
number of coins inserted'.
F
E I
L
D
/ P
O
3
6
%
3
P
A
Y
O
U
T
6
4
8 .
%
6
The following table provides the data of theoretical payout rates based on the
field payout rate.
It is recommended that the Payout is set to approx 90% (Field Payout Rate:
50%)
If the payout is set too low, the game may generate a higher profit for a given
number of coins played, but may deter repeat players.
With the payout set higher, the profit may be less but the game can attract more
players generating a higher turnover. This is especially true in a site with regular
customers.
8
%
4
0
%
4
2
%
8
4 .
%
7
2
0 .
%
7
5
6 .
%
Page 44
(see 5-7-3-3 page 65)
4
4
%
4
6
%
4
8
%
7
9
2 .
%
8
2
8 .
%
8
6
4 .
5
0
%
5
2
%
%
9
0
0 .
%
9
3
6 .
%
5
4
%
9
7
2 .
%
Publicidad
Tabla de contenido
