5-3
Resetting the Tilt
The tilt device can be reset in two ways: manual reset (default setting) performed by a
member of staff, or automatic reset.
It is also possible to disable the tilt function.
The method of changing the setting is described in
To adjust the tilt sensitivity refer to
•
Manual Reset
1.
Unlock and open the Playfield Door.
2.
Turn the Test switch, located in the upper right corner of the cabinet, On
and then Off to reset the alarm.
3.
Close and lock the Playfield Door.
Test switch
•
Automatic Reset
When the tilt is set to automatic reset, the alarm will reset 10 seconds after it
has been activated.
5-7-2 page 58.
4-3 page 37.
ON
OFF
Page 46