Publicidad
Turbo-V 1000HT PCB Controller Description
The controller (model 969-94xx) is a solid-state frequency converter
which is driven by a single chip microcomputer and is composed of a
PCB which includes power supply and 3-phase output, analog and
input/output section, microprocessor and digital section. The power
supply converts the single phase (50-60 Hz) AC mains supply into a
3-phase, low voltage, medium frequency output which is required to
power the Turbo-V pump. The microcomputer generates the variable
output frequency and controls the 3-phase output voltage according
to the software and the gas load condition of the pump. Moreover, it
manages signals from sensors, input/ output connection information
to be displayed, and gives outputs for a fully automatic operation. A
dedicated EEPROM is used to store pump operating parameters and
the input/output programmed information upon failure. The
controller can be operated via remote signals through input/output
connectors.
The following figure is a picture of the Turbo-V controller.
Figure 5
Turbo-V 1000HT PCB Controller User Manual / 87-900-906-01 (F)
Turbo-V 1000HT PCB Controller Description
Turbo-V 550 PCB Controller
Technical Information
207/262
17
Publicidad
Capítulos
