5. ASSEMBLY INSTRUCTIONS
Take all parts out of the packaging carefully and place them on a at surface. When doing this,
use suitable padding to protect the working surface. Assembly of the individual parts should
be carried out by 2 people!
Before assembly, check the parts list to verify that all parts are present. Some parts have already
been pre-assembled to simplify the assembly process for you.
STEP 1
105
1.
Attach the front stabilizer (34) to the main body. Secure with 2 sets of at washers (33),
spring washers (5) and Allen head screws (32).
2.
Attach the rear stabilizer (105) to the main body. Secure with 2 sets of at washers (33),
spring washers (5) and Allen head screws (32).
Note: You may adjust the rear end caps to compensate for any uneven surfaces.
SP-ET-9800-iE-IM-INT-V07.indb 31
65
33
5
32
31
34
33
5
32
4/26/2021 2:38:48 PM