Maintenance, Cleaning And Care; Notes On Disposal - Sportplus SP-ET-9800-iE Manual De Instrucciones

8. MAINTENANCE, CLEANING AND CARE

• After the assembly and before using the home trainer, always make sure that all bolts/nuts
are fully and correctly tightened.
• Clean the unit regularly with a slightly damp cloth and a mild cleaning agent. This is especially
important for the seat and the handles, as these parts are in contact with parts of your body
during the entirety of training.
• Regularly lubricate the bearing (7, 28, 88) with commercially available grease.
TRANSPORT
• Due to the heavy dead weight of the device, we recommend asking a 2nd person for help
for transporting the device. Proceed as follows: Put one foot on the front pedestal, hold
the device by its xed handle located underneath the training computer, and then tilt the
device in such a way, that it slides on the transport roller. When reinstalling the device, put
one foot on the front pedestal again and let the device slip to the oor slowly.
Caution! The transport rollers can cause scratching or similar on parquet oors or other
•
softwood surfaces. Always place the device on a cloth or mat, and move the device using the
cloth/mat. The retailer or manufacturer is not liable for any damage caused by nonobservance!

9. NOTES ON DISPOSAL

Packaging materials are raw materials and can be recycled.
Separate the packaging materials and dispose of them properly in the interest of
the environment. Your local administration can provide additional information.
Used devices do not belong in household waste!
Dispose of used devices properly! Doing so helps fulfill our responsibility to protect
the environment. Your local administration can provide information on collection
points and opening hours.
SP-ET-9800-iE-IM-INT-V07.indb 47
47
4/26/2021 2:38:53 PM