Sportplus SP-ET-9800-iE Manual De Instrucciones página 34

5. ASSEMBLY INSTRUCTIONS
STEP 4
43
44L
12
37L
41L
84
106
1. Attach the footplate support bars (41L& 41R)by sliding them onto the footplate bolt of
the lever connection. Secure each side with 1 set of Allen head screws (4), spring wash-
ers (5) and at washers (85). Tighten securely and then attach the end cap (84) with one
screw each (106).
2. Attach the footplate support bars (41L& 41R) to the swivel rods (25). Secure with 1 set of
Allen head screws (42), at washers (39) and nuts (38) each. Tighten fully.
3. Attach the plastic covers (37L & 37R) to the footplate support bars (41L&41R). Secure with
2 sets of screws (12 and 20) each.
4. Attach the footplates (44L& 44R) to the footplate support bars (41L& 41R). Secure with
4 sets of Allen head screws (43), at washers (46), spring washers (47) and knurled-head
screw (48) each. Tighten the knurled-head screws securely with your hand.
SP-ET-9800-iE-IM-INT-V07.indb 34
25
42
39 38 37R
20
46
47
48
106
25
37L
84
85 5
4
34
44R
38 39
42
37R
41R
46
47
48
4/26/2021 2:38:50 PM