The Flash Unit Features - Rollei 58 Instrucciones

12 . If the flash is used in full light output with continuous repititions in combination
with a zoom position of less than 35 mm, the diffuser will get hot due to high
energy .
13 . The quick change of temperatures might cause vapour condensation .
14 . Never use any defected batteries for this Flash Unit .

The Flash Unit Features

1 . Wireless MASTER function: Achieve Canon wireless flash, Nikon command flash
2 . Wireless SLAVE unit function: Compatibility with the Canon and Nikon wireless
flash system, realize TTL off camera, manual and frequency flash
3 . Power supply by Li-battery, AA rechargeable batteries (NiMH) or
external DC power
4 . Dual mode: Universal hot shoe contacts (compatible with Canon and Nikon)
5 . LED lighting mode
6 . High-Speed Sync: 1/8000s
7 . TTL flash
8 . Manual flash
9 . Multi flash
10 . S1,S2 Light flashing mode
11 . Flash exposure FEB, exposure compensation, flash exposure lock (FEL/FV)
12 . Flash control by the camera (only for the latest Canon version)
13 . Rear-curtain sync
14 . Signal tones
15 . Custom function
16 . Power save mode
17 . Overheating protection
18 . Manual, auto zoom
19 . Automatic save function
20 . Large size LCD display
21 . Quick response: Full output recycle time only 2 .3 seconds
51