Common Flash Mode - Rollei 58 Instrucciones

Common Flash Mode

60
The flash has different modes: Automatic Flash Mode, TTL Mode, (M) Manual Flash
Mode and Stroboscopic Flash Mode (Multi) .
Automatic TTL Flash Mode
Set the camera's shooting mode to <P> (program automatic exposure) or < >
(auto) if the flash should work automatically .
Select the Flash Mode
Press the MODE button so often until the LCD
shows [TTL] .
Set the Flash Exposure Compensation Value
The exposure compensation can be set in standby
mode .
1 . Rotate the dial to set the exposure compen-
sation: Rotate clockwise to increase the value
of the compensation and rotate counterclock-
wise to decrease the value .
2 . The compensation value has a range of -3 .0EV
to +3 .0EV .
The compensation value icon is as follows:
0EV –> +0 .3EV –> +0 .7EV –> +1 .0EV –> +1 .3EV –> +1 .7EV –> . . . . –> +3 .0EV
0EV –> -0 .3EV –> -0 .7EV –> -1 .0EV –> -1 .3EV –> -1 .7EV –> . . . . –> -3 .0EV
ENGLISH