Wireless Master Flash Mode (Master Canon) - Rollei 58 Instrucciones

Note:
1 . Pay attention to the difference between Canon MASTER interface and Nikon
main control interface . It corresponds only to the camera's online operations .
2 . The Canon MASTER mode from the lamp mode is consistent with the MASTER
flash . The Nikon MASTER mode from lamp mode needs to be set in each group,
independent of the main flash .
3 . Wireless off mode: normal TTL/M/Multi flash mode

Wireless MASTER Flash Mode (MASTER Canon)

Wireless MASTER flash mode (MASTER Canon) can be divided into:
1 . Automatic wireless control mode (E-TTL Auto MASTER Canon)
2 . Manual wireless control mode (Manual MASTER Canon )
3 . Stroboscopic wireless control mode (Multi stroboscopic MASTER Canon)
Press the 'Parameter Settings button' for a long time until the LCD shows the Canon
MASTER mode 'MASTER' .
Set the MASTER control unit wireless
channel: Press and hold the [Wireless Parameter
Settings button] to set the channel number (serial
number under the icon) . Rotate the dial to set the
wireless channel from 1 ~ 4 .
Wireless channel number
71