Frequency Setting - Rollei 58 Instrucciones

If you try to execute more than 10 consecutive stroboscopic flash light shots, the
flash can automatically stop in order to prevent overheating .
If this happens, please let the flash cool down for at least 15 minutes . Please use a
new battery or fully charged battery to operate this mode .
Select the flash mode
Press the [MODE] button until the LCD displays
[Multi] .

Frequency setting

Press the [Parameter Settings button] until the LCD
flickers 100 Hz . Rotate the dial to increase (clock-
wise) or decrease (counterclockwise) the frequency .
The available flash frequency can be adjusted from
1 Hz – 199 Hz .
The number of flashes set
Press the [Parameter Settings button] until the LCD
shows 20 . Rotate the dial to increase (clockwise) or
decrease (counterclockwise) the number of flashes .
The flashes can be set from 1 to 40 . After completi-
on press the "Parameter Settings Button" to exit .
Exposure power setting
Rotate the dial to increase (clockwise) or decrease (counterclockwise) the power in
multi mode .
The relational table of flash power and number of flashes
Flash power
Number of flashes
1/128 1/64
1–40 1–20
1/32 1/16
1–12 1–8
1/8 1/4
1–4 1–2
65