Multi Command Master Mode (Multi Command Master Nikon) - Rollei 58 Instrucciones

Group C: Press the [Wireless Parameter setting
78
button] to (C) so that the Group C model power
twinkles . Rotate the dial to change group C
model between wireless off, i-TTL and M . If the
setting is done, press the [Wireless Parameter
setting button] to quit .
If the SLAVE flash light group setting is done, it can be turned on or off . ON:
The wireless flash model group number will be shown on the display . OFF: The
wireless group number won't be shown on the display .
4. SLAVE unit power setting
Press the [Parameter setting button] to <A> so that the group power twinkles (if
group A is in wireless mode) . Rotate the dial to set the power . Afterwards press the
[Parameter setting button] to enter group setting .
Multi Command MASTER Mode
(Multi Command MASTER Nikon)
If the MASTER unit is in Multi mode, the SLAVE unit supports „Wireless flash off
mode" and „Multi mode" .
1 . Press the [Parameter setting button] for a long
time to set up the Nikon MASTER unit (MASTER
Nikon) .
2 . Press shortly the [Mode flash select button]
so set up the multi mode on the MASTER flash
light .
3 . SLAVE unit group mode setting .
ENGLISH