Rollei 58 Instrucciones página 80

Under SLAVE mode: Press [Flash mode select button] for a longer time to
80
shift into flash mode (Salve C /SLAVE c /S1/S2) as off camera the SLAVE unit can
build different light .
SLAVE c
S1
Note:
1 . Press the [Flash mode select button] shortly to change the SLAVE flash unit only
in Wireless SLAVE flash mode . If the flash is connected to the camera and you
press the shutter button, the Flash Unit will not flash, you need to manually exit
the wireless slave mode to perform the online operation .
2 . In the SLAVE mode there is no need for the AF assist light flash . Therefore
you can turn the lamp off through the custom function (Fn-08) . If you exit the
wireless SLAVE mode and you need the focus lamp in normal mode, you need to
turn it on again in the custom settings
3 . In SLAVE mode the flash will go in a standby mode after 60 seconds, but it
won't enter a dormant state as it is waiting for the signal of the MASTER flash .
ENGLISH
SLAVE n
S2