Signal Tones - Rollei 58 Instrucciones

2. Wireless optical flash
85
If the built-in flash light or an outlay flash light is used as MASTER flash light,
please put different angels . The wireless channel will be reflected back by the wall
indoor . So please choose more space between flash light .
Due to a higher sensor sensitivity the wireless trigger sensing does have a distance
of up to 15 meters when using the S1 or S2 mode outside . If a slave Flash Unit is
used, test the S1 or S2 mode whether it is synchronous before shooting .
Note: Don't put any barriers between the master and slave Flash Unit . The barrier
will prevent to send a wireless light signal .
Make sure that the optic control sensor is towarded to the master Flash Unit .
The Flash Unit is not to be used under sunshine .
Setting Position and Operation range
Outdoor Indoor Outdoor Indoor

Signal Tones:

Different sounds are used to indicate different working conditions .