Rollei 58 Instrucciones página 89

Adjust the flash head tilt, rotation angel and
89
select the reflection plane
If the Flash Units' head is pitched up so that the
ceiling is used as a reflection plane, this can have
a good effect .
The effective distance between the Flash Unit head
White Ceiling
and the reflection plane should be about 1 m to
2 m . If colour photos are taken, please choose a white or strong reflection for
flashing . Otherwise the photos might be of poor quality .
Using the Built-In Refecting Card
The built-in reflecting card ensures that the subject
will be brighter, sharper and it avoids a direct
lighting in front of the subject .
1 .) Rotate the flash head of up to 90 degrees .
2 .) Pull out the wide panel and reflecting card .
1 .) 2 .) 3 .)
3 .) Push in the wide panel and only leave the
reflecting card outside .