Rollei 58 Instrucciones página 68

a) To achieve the high speed sync in SLAVE c mode, the Canon wireless instructions
68
must be received . The built-in flash of the camera must be the MASTER flash .
The maximum sync speed is only 1 / 200 or 1 / 250 .
If you use a Canon camera, the camera itself does not have high speed sync .
Therefore you should take an extra Flash Unit which has a MASTER function and
is connected by the hot shoe mount to the camera . The MASTER light will give
the signal to the SLAVE light to make it off machine high speed sync .
b) To achieve the high speed sync in SLAVE n mode, you can use the built-in flash
of the Nikon camera as the built-in flash has the MASTER function . Open the
Auto AP function in your camera and use the built-in flash . The built-in flash will
send the data only by the lamp, it does not sync in flash .
The camera menu access (only the latest Canon cameras)
The latest Canon cameras support that the flash can be operated through the
camera menu . Within the flash control menu of „External flash function settings"
and „External flash custom function settings" flash releated parameters such as
switch E-TTL mode, manual flash mode and multiple flash mode (Multi), wireless
flash setting, surrounded by exposure, exposure compensation, the focal length and
the function of advanced options can be set .
ENGLISH