Full Auto Wireless Master Unit; (E-Ttl, Master Canon) - Rollei 58 Instrucciones

Set the MASTER control unit:
72
You can activate and deactivate the Master unit .
Set MASTER flash: Press the [Wireless Parameter
Settings button] until
the dial to set the MASTER flash output mode .
If the icon
vated . If the icon
activated .
Note:
• The SLAVE flash should have the same setting as the MASTER unit if the Canon
flash is used as MASTER .
• The Canon Flash Unit needs to have the same group A power as the MASTER
model power .
• The MASTER mode supports high-speed synchronous but does not support rear
curtain sync .

Full Auto Wireless MASTER Unit

(E-TTL, MASTER Canon)

Press and hold the [Flash mode select button] on the MASTER flash . There you can
set the MASTER light as Auto E-TTL mode to Auto flash shooting .
ENGLISH
icon is flashing . Rotate
is shown MASTER flash is deacti-
is shown MASTER flash is MASTER switch symbol