Wireless Instruction Mode; (Slave C /Slave N) - Rollei 58 Instrucciones

Wireless Instruction Mode

(SLAVE c /SLAVE n)

SLAVE c: This indicates that only wireless flash signals from the camera flash
of Canon 7D/60D/60c (built-in flash) and 580EX II, 600EX, ST-E2 and the Vice
factory MASTER wireless flash signal can be received .
SLAVE n: This indicates that C instruction sign from Nikon camera built-in flash
instruction and SB-900/800/700, SU-800 and the Vice factory MASTER command
signal can be received .
SLAVE c/n: This supports 4 channels, 3 different groups, TTL, Manual and Multi
Wireless flash . Rotate the flash light head in order to wireless trigger to MASTER
light . Before shooting, you need to set up the same channel about flash light
and MASTER light .
Shortly press the Zoom Button until channel or group twinkles for the
SLAVE unit to set the communication channel of the SLAVE unit (1 .2 .3 .4) as well
as the SLAVE unit group (A .B .C) .
81