Flash Unit; Attach The Flash To The Camera - Rollei 58 Instrucciones

Attach the Flash to the Camera

58
1. Prepare to install the Flash Unit
Rotate the locking plate up to the highest point
(direction shown by the arrow) .
2. Install the Flash Unit
Install the Flash Unit's mounting support into
the hot shoe of your camera .
3. Lock the Flash Unit
Tighten the locking plate by rotating in the
direction shown by the arrow .
4. Detach the Flash Unit
Rotate the locking plate up to the highest
point, than remove the Flash Unit from the hot
shoe mount .
Note:
• Make sure that the Flash Unit and camera are
turned off . Do not detach forcly the Flash Unit
from the camera .
ENGLISH
1
2
3
4