Bahco TASMB Serie Traducción De Las Instrucciones Originales página 24

TASMB AND TAWMB SERIES
STD SLIM/SCR
This function will allow user to enable or disable backlight toggle function. If toggle mode is disabled,
last button press. If toggle mode is enabled, a BACKLIGHT button press will turn on backlight and it will
remain on until next BACKLIGHT button press.
1. From Settings menu, use UP/DOWN buttons to highlight TOGGLE BACKLGHT selection then press
ENTER button.
2. TOGGLE BACKLGHT screen is displayed.
3. Use UP/DOWN buttons to highlight ENABLE or DISABLE (factory default) selection.
4. Press ENTER button to accept selection and exit to Settings menu.
Note: Backlight will turn off when tool powers down either by POWER button press or sleep time.
Note: If toggle backlight is enabled and backlight is on, backlight will remain on during and
after applying torque.
STD SLIM/SCR