Bahco TASMB Serie Traducción De Las Instrucciones Originales página 39

STANDARD AND SLIM ELECTRONIC TORQUE-ANGLE BLUETOOTH
AND ELECTRONIC TORQUE-ANGLE BLUETOOTH
STD
SLIM
CALIBRATION CYCLE COUNT
Each time torque or angle target is reached, wrench calibration cycle counter is incremented. Maximum
cycle count is 999999.
1. From Calibration Menu, highlight CAL CYCLE COUNT menu selection using UP/DOWN buttons.
2. Press ENTER button to display CAL CYCLE COUNT screen.
3. To exit CAL CYCLE COUNT screen without clearing count, press ENTER button while EXIT menu
selection is highlighted.
4. To reset wrench cal cycle count to 0, highlight CLEAR menu selection then press ENTER button.
5. EXIT menu selection is automatically highlighted after count is cleared. Press ENTER button to
return to main menu.
STD
® WRENCH
®
SCREWDRIVER
39