Bahco TASMB Serie Traducción De Las Instrucciones Originales página 35

STANDARD AND SLIM ELECTRONIC TORQUE-ANGLE BLUETOOTH ® WRENCH
®
AND ELECTRONIC TORQUE-ANGLE BLUETOOTH SCREWDRIVER
PRESET UNLOCK
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight CONFIGURE menu selection using UP/DOWN buttons.
3. Press ENTER button to display Password screen.
4. Follow password entry procedure found in Calibration manual.
STD
SLIM
DELETE PRESETS
Delete Presets function allows user to delete all presets at once.
ENTER button.
3. Use UP/DOWN buttons to select YES or NO selection.
STD SLIM
35