Changing The Front Direction Indicator Bulbs; Changing The Rear Light Bulb - APRILIA SCARABEO50 I.E.-100 4T Manual Del Usuario

5
1
4
CHANGING THE FRONT
DIRECTION INDICATOR
BULBS
Carefully read page 77 (BULBS).
♦
Position the vehicle on the stand.
♦
Unscrew and remove the screw (1).
NOTE
While removing the protection
screen, proceed carefully in order not to
break the cog.
♦
Remove the protection screen (2).
♦
Remove the amber yellow glass (3).
NOTE
Upon reassembly, correctly position
the protection screen in its seat.
Tighten the screw (1) moderately and care-
fully, to avoid damaging the protection
screen.
All manuals and user guides at all-guides.com
3
2 6
♦
Press the bulb (4) slightly and rotate it an-
ticlockwise.
♦
Extract the bulb (4) from its seat.
NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
♦
Correctly install a new bulb of the same
type.
NOTE
If the bulb socket (5) goes out of its
seat, insert it correctly, making the bulb socket
opening coincide with the screw seat.
CHANGING
THE REAR LIGHT BULB
Carefully read page 77 (BULBS).
♦
Position the vehicle on the stand.
♦
Unscrew and remove the two screws (6).
NOTE
screen, proceed carefully in order not to
break the cog.
6
7
♦
Remove the protection screen (7).
♦
Press the bulb slightly and rotate it anti-
clockwise.
♦
Remove the bulb from its seat.
NOTE
ing the two bulb pins coincide with the rel-
evant guides on the socket.
♦
Correctly install a new bulb of the same
type.
NOTE
the protection screen in its seat.
Tighten the screws (6) moderately and care-
fully, to avoid damaging the protection
screen.
use and maintenance Scarabeo 50
While removing the protection
Insert the bulb in the socket, mak-
Upon reassembly, correctly position
- Scarabeo 100 4T 79