Adjusting The Accelerator Control - APRILIA SCARABEO50 I.E.-100 4T Manual Del Usuario

100
If necessary:
♦
Act on the adjusting screw (1) positioned
on the carburettor.
By SCREWING IT (clockwise), you increase
the engine rpm.
By UNSCREWING IT (anticlockwise), you
decrease the engine rpm.
♦
Twist the throttle grip, accelerating and de-
celerating a few times to make sure that it
functions correctly and to check if the idling
speed is constant.
NOTE
Do not act on the air adjusting screw,
to avoid variations of the carburation setting.
CAUTION
If necessary, contact your aprilia Official
Dealer.
use and maintenance Scarabeo 50
70
All manuals and user guides at all-guides.com
1
2
4
ADJUSTING
THE ACCELERATOR CONTROL
Carefully read page 47 (MAINTENANCE).
The ideal slack of the accelerator control
should be about 2-3 mm, that can be meas-
ured on the throttle grip.
To adjust the slack, proceed as follows:
♦
Position the vehicle on the centre stand,
on a solid and level surface.
♦
Remove the protection element (2).
♦
Loosen the nut (3).
♦
Act on the adjuster (4), positioned at the
beginning of the accelerator control cable.
After the adjustment:
♦
Tighten the nut (3), thus locking the adjuster
(4) and put back the protection element (2).
- Scarabeo 100 4T
3
After the adjustment, make sure that the
rotation of the handlebar does not modify
the engine idling rpm and that the throt-
tle grip returns smoothly and automati-
cally to its original position after being
released.
WARNING