Instructions For Use; Preliminary Checking Operations - APRILIA SCARABEO50 I.E.-100 4T Manual Del Usuario

INSTRUCTIONS FOR USE

WARNING
Before departure, always carry out a pre-
liminary checking of the vehicle, to make
sure that it functions correctly and safely,
see the following table PRELIMINARY
CHECKING OPERATIONS.
The non-performance of these checking
operations can cause severe personal
injuries or damages to the vehicle.
Do not hesitate to consult your aprilia
Official Dealer in case there is something
you do not understand about the func-
tioning of some controls or in case you
suspect or discover some irregularities.
It does not take long to carry out a check-
up and this operation ensures you much
more safety.
All manuals and user guides at all-guides.com

PRELIMINARY CHECKING OPERATIONS

Component
Disc brakes
Rear drum brake
100
Accelerator
Mixer oil
Wheel / tyres
Brake levers
Steering
Stand
Fastening elements
Fuel tank
Lights, warning lights,
injection warning light
, horn and electric
devices
Injection pump
Check
Check the functioning, the fluid level and make sure there
are no leaks. Check the wear of the pads.
Top up, if necessary.
Check the functioning, the idle stroke and control lever
condition. Adjust the play, if necessary.
Make sure that it works smoothly and that it is possible to
open and close it completely, in all steering positions.
If necessary, adjust and/or lubricate it.
Check and/or top up, if necessary.
Check the tyre surface, the inflation pressure, wear and
tear and any damage.
Remove any foreign matter that may be stuck in the tread
grooves.
Make sure that they work smoothly.
If necessary, lubricate the articulations.
Make sure that the steering rotates smoothly, without any
clearance or slackening.
Make sure that they work smoothly and that the spring
tension brings it back to its normal position. If necessary,
lubricate joints and hinges.
Make sure that the fastening elements are not loose.
If necessary, adjust or tighten them.
Check the fuel level and top up, if necessary.
Make sure there are no leaks or occlusions in the circuit.
Check the proper functioning of all the devices.
Change the bulbs or intervene in case of failure.
Check operation.
use and maintenance Scarabeo 50
Page
31, 32, 61
33, 62
70
28
34
–
63
68
–
27, 83
72 – 81
18
- Scarabeo 100 4T 37