Removing The Exhaust Silencer - APRILIA SCARABEO50 I.E.-100 4T Manual Del Usuario

100
3
REMOVING
THE EXHAUST SILENCER
Carefully read page 47 (MAINTENANCE).
♦
Position the vehicle on the centre stand,
on a solid and level surface.
WARNING
Before you go on with the following op-
erations, allow the engine and the silencer
to cool down to the ambient temperature
to avoid burns.
All manuals and user guides at all-guides.com
100
1
♦
Remove the inspection cover, see page 65
(REMOVING THE INSPECTION COVER).
100
♦
Unloose and remove the two fixing screws
(1) from the engine silencer.
Screws (1) driving torque:
25 Nm (2.5 kgm).
♦
Unloose and remove the two nuts (2).
Nuts (2) driving torque:
12 Nm (1.2 kgm).
♦
Remove the exhaust silencer (3).
2
NOTE
between the exhaust manifold and the si-
lencer with a new one.
use and maintenance Scarabeo 50
On reassembly, replace the seal
- Scarabeo 100 4T 67