Checking The Brake Pad Wear - APRILIA SCARABEO50 I.E.-100 4T Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CHECKING THE BRAKE PAD
WEAR
Carefully read page 31 (BRAKE FLUID -
recommendations), page 32 (DISC
BRAKES), page 47 (MAINTENANCE).
Check the brake pad wear after the first 500
km (312 mi) and successively every 2000
km (1250 mi).
The wear of the brake pads depends on the
use, on the kind of drive and on the road.
The wear will be greater when the vehicle is
driven on dirty or wet roads.
WARNING
Check the wear of the brake pads espe-
cially before every trip.
All manuals and user guides at all-guides.com
1
To carry out a rapid checking of the wear of
the front pads, proceed as follows:
Position the vehicle on the centre stand,
on a solid and level surface.
Remove the brake caliper cover (1).
Carry out a visual check between brake
disc and pads.
WARNING
The excessive wear of the friction mate-
rial would cause the contact of the pad
metal support with the disc, with conse-
quent metallic noise and production of
sparks from the caliper; braking effi-
ciency, safety and soundness of the disc
would thus be negatively affected.
If the thickness of the friction material (even
of one pad only) has reduced to about 1.5
mm, replace both pads.
Have the pads changed by your aprilia
Official Dealer.
use and maintenance Scarabeo 50
WARNING
- Scarabeo 100 4T
61

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido