Changing The Rear Direction Indicator Bulbs - APRILIA SCARABEO50 I.E.-100 4T Manual Del Usuario

1
2
CHANGING THE REAR
DIRECTION INDICATOR
BULBS
Carefully read page 77 (BULBS).
♦
Position the vehicle on the stand.
♦
Unscrew and remove the two screws (1).
NOTE
While removing the protection
screen, proceed carefully in order not to
break the cog.
♦
Remove the protection screen (2).
NOTE
Upon reassembly, correctly position
the protection screen in its seat.
♦
Remove the protection screen (3), by pull-
ing it to the vehicle external side.
use and maintenance Scarabeo 50
80
All manuals and user guides at all-guides.com
6
5
1
♦
Gently press on the amber yellow glass (4),
turn it anticlockwise and remove it.
NOTE
While removing the protection
screen, proceed carefully in order not to break
the cog.
♦
Press the bulb (5) slightly and rotate it an-
ticlockwise.
♦
Extract the bulb (5) from its seat.
NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
♦
Correctly install a new bulb of the same
type.
- Scarabeo 100 4T
3
4
NOTE
seat, insert it correctly, making the bulb
socket opening coincide with the screw seat.
If the bulb socket (6) goes out of its