OPERATING THE VEHICLE
Kicksstarter pedal
Side stand
The keys
The Kickstarter pedal is located on the right side of
the engine. The upper portion rotates.
To start the engine, rotate the lever outward and
give it a sharp blow down. The lever comes back up
automatically.
After starting, manually return the lever to the rest
position.
The transmission must be in neutral for the
engine to start.
Lower the stand (left side) until it contacts the stop
and then tilt the bike to the left until the base is in
contact with the ground.
Check that the ground is solid and the position stable.
WARNING
When the stand is unloaded from the weight of the vehicle, it
automatically returns to the rest position.
Do not sit on the resting vehicle when it is on the
side stand.
The bike has two keys (one is a spare) to be used
for the ignition switch, to turn the engine on or off.
- To start the engine, turn the key on
- To turn off the engine, turn the key off
.
.
75