Securing The Side Burner; Placing The Side Burner Grate; Inserting The Igniter Wire; Attaching The Hose Retainer - Pit Boss Pro PB1100PSC2 Manual Del Usuario

20. SECURING THE SIDE BURNER

Parts Required:
1 x Side Burner (#17)
Installation:
• Remove the two pre-installed screws from the underside of the Side
Burner Shelf. From above, carefully insert the Side Burner into the Side
Burner Shelf, then secure using the two screws previously removed.
• Next, insert the end of the Side Burner onto the side burner valve,
completing the connection of the Side Burner to the Burner Knob.

21. PLACING THE SIDE BURNER GRATE

Parts Required:
1 x Side Burner Grate (#19)
Installation:
• Open the lid of the Side Burner Shelf. Place the Side Burner Grate into
the Side Burner Shelf.

22. INSERTING THE IGNITER WIRE

Installation:
• Locate the igniter wire from behind the gas control panel (front panel
with three knobs).
• Without disconnection from the gas control panel, plug the igniter
wire into the end of the electrode of the Side Burner. Check to ensure
the electrode is firmly connected.

23. ATTACHING THE HOSE RETAINER

Installation:
• Mount the fixed hose retainer from the gas hose onto the back of the
Side Burner Panel with the pre-installed screw.
16
20
17
21
19
22
23