Mounting Uplace™ Electrode Arm - Mettler Toledo SevenExcellence Manual De Usuario

4.3 Mounting uPlace™ electrode arm
The electrode arm can be used as stand alone or it can
be attached to the instrument on the left or right side,
according to your preferences. The height of the
electrode arm can be varied by using the extension
shaft part. Use the wrench to attach the extension part .
Assembly of the electrode arm
1 Use the wrench to attach the base to the electrode
arm by tightening the screws. The electrode arm
can now be used in the stand alone mode.
18 Putting into Operation​ ​ SevenExcellence™