Mettler Toledo Q3 Manual De Usuario página 15

Injury and damage to the pump or the bottle due to high pressure
High pressure from external gas can damage the pump or the bottle.
1 Use a regulator on the external gas line.
2 Ensure that the pressure of the external gas does not exceed 0.5 bar (7.2 psi).
Injury due to splashing liquids
If the pressure in the bottle is not released, liquid might splash when removing the micro dosing
valve, opening the bottle, or removing the liquid tube.
Always release pressure before removing the micro dosing valve, opening the bottle, or
removing the liquid tube.
Injury due to leaking liquids
Wrongly cut tubing can result in leaking connections.
Cut the tubes with a tube cutter or a sharp knife.
Injury due to moving parts
Do not reach into the working area while parts of the instrument are moving.
Injury due to sharp objects or broken glass
Instrument components, e.g., glass, can break and lead to injuries.
Always proceed with focus and care.
NOTICE
Damage to the instrument or malfunction due to the use of unsuitable parts
Only use parts from METTLER TOLEDO that are intended to be used with your instrument.
NOTICE
Damage to the instrument
The instrument contains no user-serviceable parts.
1 Do not open the instrument.
2 In the event of problems, please contact a METTLER TOLEDO representative.
Q3 Dosing Module
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
7