Dosing Heads And Equipment - Mettler Toledo Q3 Manual De Usuario

ErgoClip adapter holder and adapters
The Q3 dosing module includes the ErgoClip adapter holder,
which can be installed on the SmartGrid weighing pan. It can
hold adapters of various sizes allowing perfect positioning of
different sample vessels. Additional adapters are available as
accessories. See Accessories.
The Q3 dosing module is delivered with a variety of
ErgoClips for various usage. See [Selecting and using an
ErgoClip Page 19]
ErgoClip adapter stabilizer
The Q3 dosing module includes the ErgoClip adapter
stabilizer, which can be installed on the SmartGrid weighing
pan. The ErgoClip adapter stabilizer is especially designed to
provide more stability to the adapter. It can therefore be used
for tall and narrow vessels.
ErgoClip height extension
The Q3 dosing module includes the ErgoClip height
extension, which can be installed on the SmartGrid weighing
pan. This ErgoClip has a flat surface and can therefore
accommodate any sample vessel. It is especially useful for
short sample vessels, such as weighing boats.

3.4 Dosing heads and equipment

Powder dosing head
Powder dosing heads are used for automated powder
dosing. If a small quantity of powder is required, the dosing
head can be used without a vial attached to it. In this case,
the opening can then be closed using the cap included in the
delivery. The dosing heads can be stored in appropriate
storage containers. Vials and storage containers need to be
purchased separately.
If a printer is connected, you can use a pre-defined template
to print a label with the dosing-head data from the RFID tag
and affix this label to the dosing head.
Powder test head
The powder test head is used to test a powder dosing
system. The dosing head is filled with calcium carbonate
(CaCO ) and uses a predefined test program to check the
3
dosing functionality of the system. The powder test head is
programmed to perform 15 tests. Each test weighs 10 doses of a pre-defined amount of powder. If your
instrument fails the tests, inform a METTLER TOLEDO service technician.
10 Q3 Dosing Module