Husqvarna TC 449 I.E 2012 Caracteristicas - Uso - Mantenimiento página 75

ENGINE STARTING (TE-TXC)
With cold engine, i.e., after the motorcycle has not
been used for a while or in low ambient temperatures,
operate in the following manner:
1) pull clutch lever (1) and hold it in place;
2) shift gear pedal (2) to neutral position;
3) press the starter button (3), then release clutch le-
ver (1).
When a cold engine has just been started, do not
increase revs, to ensure an adequate oil warm-up
and circulation.
Note *:
A safety switch is set on the clutch lever support. This
switch allows you to ONLY start the engine with the
gearbox idle, or with the gear engaged and the clutch
lever pulled.
IMPORTANT
NEVER START ENGINE WITH BATTERY DIS-
CONNECTED FROM CIRCUIT.
TE
1
TXC
1
SPECIFICATIONS - OPERATION - MAINTENANCE
N
2
3
EN - 21