Husqvarna TC 449 I.E 2012 Caracteristicas - Uso - Mantenimiento página 99

TYRES
Care should be taken to keep the tyres properly inflated.
See "Technical data" chart at the beginning of the manu-
al for correct tyre inflation pressure.
Replace the tyre if its wear exceeds reference values on
the table below.
MINIMUM HEIGHT
OF THE TREAD
FRONT 3 mm (0.118 in)
REAR 3 mm (0.118 in)
BRAKES
The key components of the braking systems are: brake
master cylinder with its lever (front) or pedal (rear),
brake lines, calliper assembly and disc.
LEGEND
1. Front brake lever
2. Front brake master cylinder with fluid reservoir
3. Front brake line
4. Front brake calliper
5. Front brake disc
6. Rear brake fluid reservoir
7. Rear brake line
8. Rear brake calliper
9. Rear brake disc
10. Rear brake master cylinder
11. Rear brake control pedal
SPECIFICATIONS - OPERATION - MAINTENANCE
5
6
7
8
10
9
3
4
2
1
11
EN - 45