3M DBI Sala KF71201466 Manual Del Usuario página 6

;
Before using this equipment, record the product identification information from the ID label in the 'Inspection and
Maintenance Log' at the back of this manual.
:
DESCRIPTION
The 3M™ DBI-SALA Work Positioning Lanyard is intended to be used as part of personal work positioning system. Work
®
positioning systems typically include a full body harness or body belt, positioning lanyard, and a backup personal fall arrest
system. This equipment is not suitable for fall arrest purposes and that it is necessary to supplement arrangements for work
positioning with collective means (e. g. safety nets) or personal means (e. g. fall arrest systems) of protection against falls
from a height.
Figure 1 identifies Adjustable Work Positioning Lanyards covered by this instruction. See Table 1 for lanyard and connector
specifications.
Lanyard Specifications:
See Figure 1: Description
A Web Lanyard
B
Spreader Bar
Connector Specifications:
See Figure 1: Description
C 9502116 Snap Hook
D
D-Ring
Performance Specifications:
See Figure 1: Description
Capacity: Lanyards are for use by one person with a combined weight (clothing, tools, etc.)
€
x 1
meeting the Weight Range specified in Figure 1.
LY
Length of the lanyard (see Figure 1).
Minimum: -35 °C (-31 °F)
Operating
temperature:
Maximum: 57 °C (134,6 °F)
Table 1 – Specifications
Material Gate Opening
Steel 19 mm (3/4 in)
Steel
6
Leg Material
Polyester
Aluminium Alloy
Gate Strength
16 kN (3 597 lb)
X X
Tensile
Strength
22 kN (4 946 lb)
22 kN (4 946 lb)