Cleaning The Device; Servicing - Cub Cadet 17AIEACI603 Instrucciones De Funcionamiento Originales

Servicing

Maintenance indicators
Note
displayed.
– – –
Change the engine oil immediately (see engine
operating manual).
This indicator appears every 50 operating hours for
a period of 7 minutes.
– –
The engine oil level is too low.
This indication is only displayed for devices whose
engine has an oil pressure switch.
the engine oil level (see the engine operating
manual). Top up the oil if required.
– –
If you turn the ignition key to the
operating hours.
Charge the battery as quickly as possible.
It may be necessary to have the charging system
checked by a service centre for possible damage.
– – –
engine operating manual).
This indicator appears every 25 operating hours for
a period of 7 minutes.
Changing the oil
Oil level
Battery voltage
position, the

Cleaning the device

Do not use high-pressure cleaners for cleaning
the device.
Air lter mainte-
Switch the parking brake on.
nance
Clean the device with a scrubbing brush, hand
brush or a cloth.
Servicing
WARNING!
Risk of injuries or material damage
Only perform maintenance and cleaning
work on the device with the engine at a
standstill.
Remove the ignition key and the spark-
plug connectors.
Wait until all moving parts have come
to a complete stop and the engine has
cooled down.
Never reach into the rotating cutter
blades.
Only have repair and maintenance
work and the replacement of safety
specialist or a specialist service centre.
Only have the cutter blades replaced
or re-sharpened by a specialist service
centre.
Clean the device and all add-on and
accessory parts after every instance
of use. Collections of very dry dirt and
mowing residues can present a risk of
Attention!
Note
the area around the rear axle/gearbox and
gearbox fan.
EN
21