Storage; Transport; Troubleshooting - Cub Cadet 17AIEACI603 Instrucciones De Funcionamiento Originales

Ocultar thumbs Ver también para 17AIEACI603:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 106

Storage

Storage
Attention!
Damage to appliance materials
Store the device in a clean, dry enclosed space.
Protect the device from rust when storing it for
lengthy periods of time.
Protect the device from frost.
Clean the device and the grass catcher.
Wipe all metal parts down with an oily cloth or
spray them with oil to protect them from rust.
Charge the battery.
Remove the battery in the event of long-term
storage (e.g. over winter).
Charge up the battery every 6–8 weeks in the
event of long-term storage and before reinstalling.
Drain the fuel and shut down the engine – see the
engine manual.
Check the tyre pressure.

Transport

Note
oughfares in accordance with national road
legislation (StVO).
Short distances
mower.
Prior to driving, move the cutter deck to the
highest position (index 4.5).
Drive the machine only short distances to change
its location of use.
Risk of injuries or material damage
In case of doubt always take your mower to a specialist workshop.
Shut the device down prior to all checks and all work on the cutter deck.
Protect yourself against injury by doing the following prior to all performing work on the device:
-
- Remove the ignition key
- Engage the parking brake
- Wait until all rotating parts have come to a standstill
- Wait until the engine has cooled down
-
Long distances
Danger posed by unstable and unsecured
ramps
Risk of serious injury to people and sever
damage to property
If you are pushing the device onto a
the ramp is stable and secure.
Danger posed by inadequate fastening
Turbulence during transport
If you are transporting the device in a
trailer or lorry, fasten it and secure it
adequately.
Environmental hazard due to leaked fuel
Do not transport the device in a tilted state.
-
Transport the device on a transport vehicle over
long distances.
Manually push the device in neutral into/onto the
transport vehicle. Pull both gear release levers
back and press them downwards into the recess.
Activate the parking brake and secure the device
against slipping.

Troubleshooting

WARNING!
WARNING!
WARNING!
Attention!
EN
25

Publicidad

Tabla de contenido
loading

Tabla de contenido