Cleaning The Air Filter; Motor Management; Adjusting The Carburetor - Stihl FS 110 Manual De Instrucciones

Ocultar thumbs Ver también para FS 110:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning the Air Filter

4
3
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power:
:
Set the choke lever to g.
:
Take out screw (1) and
:
Remove the filter cover (2).
:
Clean away loose dirt from around
the filter.
:
Remove the filter element (3) from
the filter housing (4).
:
Fit a new filter element. As a
temporary measure you can knock it
out on the palm of your hand or blow
it out. Do not wash.
:
Replace any damaged parts.
:
Install filter element in the filter
housing.
:
Refit the filter cover.
:
Insert the screw and tighten it down
firmly.
FS 110

Motor Management

Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
1
2
English / USA

Adjusting the Carburetor

L
H
3/4
3/4
LA
The carburetor comes from the factory
with a standard setting.
This setting provides an optimum fuel-air
mixture under most operating
conditions.
With this carburetor it is only possible to
adjust the engine idle speed within fine
limits.
37

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido