English / USA
15
16
16
15
16
Fitting the Throttle Cable
Do not kink the throttle cable or lay
it in tight radii – make sure the
throttle trigger moves freely.
:
Press the throttle cable (15) into the
retainers (16).
Throttle Cable Adjustment
On control handles with slide:
:
Go to "Adjusting the Throttle Cable".
22
7
3
Swiveling the Handlebar
Transport position:
:
Release the wing screw (3) and
unscrew it until the handlebar (7)
can be turned clockwise.
:
Turn the handlebar 90° and then
then swing the handles down.
:
Tighten down the wing screw firmly.
Working position:
:
Reverse the sequence described
above to swing the handles up
and turn the handlebar counter-
clockwise.
Mounting the Loop Handle
2
90°
Loop handle with barrier bar
:
Insert square nuts (1) in the
barrier bar (2).
:
Line up the holes.
1
1
FS 110