Stihl FS 110 Manual De Instrucciones página 46

1
2
Removing remaining nylon line
:
Open the mowing head – hold it
steady with one hand and unscrew
the cap (1).
:
Disengage the spool (2), take it out
of the mowing head and remove the
remaining nylon line.
Winding nylon line onto spool
A prewound spool – see "Special
Accessories" – may be installed to
save the following procedure.
FS 110
3
4
3
: Use orange-coded nylon line with a
diameter of 0.095" (2.4 mm).
: Cut two 8-ft (2.5 m) lengths of nylon
line from the reel – see "Special
Accessories" .
:
Insert the end of each line (3) in the
holes (4) in the spool.
:
Bend the ends of the lines over the
edge of the holes to form a hook.
English / USA
5
: Straighten out the nylon lines and
wind them tightly onto the spool –
one nylon line in each chamber.
:
Engage the ends of the nylon lines
in the notches (5).
Assembling the mowing head
Check that the compression spring
is installed (see "Mounting the
cutting tool", "Mounting the mowing
head").
5
45