Maintenance Chart - Stihl FS 110 Manual De Instrucciones

English / USA

Maintenance Chart

Please note that the following maintenance intervals apply for normal operating
conditions. If your daily working time is longer than normal or cutting conditions
are difficult (very dusty work area, etc.), shorten the specified intervals accordingly.
Complete machine
Control handle
Air filter
Filter in fuel tank
Fuel tank
Carburetor
Spark plug
Cooling inlets
Valve clearance
Combustion Chamber
Spark arresting screen in muffler*
All accessible screws and nuts (not
adjusting screws)
* see "Guide to Using this Manual"
48
Visual inspection (condition, leaks)
Clean
Check operation
Clean
Replace
Check
Replace
Clean
Check idle adjustment – cutting tool
must not turn
Readjust idle
Readjust electrode gap
Inspect
Clean
Check and adjust if necessary, after
about 139 hours of operation
Decarbonizing after 139 hours of
operation, then every 150 hours of
operation.
Inspect
Replace
Retighten
X X
X
X X
X X
X
X
X X
X
X
X X X
X X
X
X
X
X
X
X
X X
X
FS 110